INDUSTRIAL SANDBLASTERS

Code 312102

SANDBLASTER WYTTEX SABLEX

Designed specially to stringent needs required for surface treatments in the precision, jewellery, costume jewellery, plastic, matrix industries and more where they are used to give a grand variety of finishes, such as satin, matt, cleaning, decorated and deburring.

By the use of different types of abrasives and pressures a large range of effects and finishes can be obtained, from satin, to deep engraved.

When the abrasive compounds are used in small quantities a closed circuit is formed using the aspirator system, this means a saving in abrasive.

The dust collector eliminates the dust and particles produced by the abrasive compounds.

Technical Details

Cabin size

650 x 400 x 650 mm. high

Size

650 x 700 x 1450 mm. high

Operating range

0 to 6 atmospheres pressure
300 to 600 litres/ minute

Blasting pistol

suction type, fixed or portable

Air control

Pedal

Tank capacity

10 Kg. depending on abrasive

Motor colector

1/6 Hp monophase

Aspirator

Fan type

Extraction

1,5 m3/minute

Net weight

90 Kg.

• Built in steel 2 mm. thicke painted grey outside and white inside
• Size: 1000 mm. x 700 mm. x 1480 mm. high
• Internal lighting 3 20W. fluorescents.
• Frontal opening 980 x 480 mm with sleeves to all access to interior.d
• Compressed air circuit con pressure regulator, and electrovalve to contrl the sandblasting pistol.
• Air suction pistol, amount of abrasive used depends on the nozzle diameter , between 500 y 1000 litres per minute at 6 Atm..